17:42 <leio> janneg: fwiw, the branch fails to build with https://bpa.st/O34Q - but as I don't use the wireless, I'll just disable it for now and test hdmi regardless

17:44 <j`ey> looks like ce520e46298ec9099c93d0f215f7ee8309c3ee68

17:45 <j`ey> drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h needs #define BRCMF_INFO_ON 0 in the else clause

18:05 <leio> janneg: anyhow, no luck, but more info in dmesg: https://bpa.st/UO2A

18:06 <leio> (after 31s is HDMI unplug and replug)

18:07 <leio> this is the 4K monitor now just in case, 6K looked similar log though

18:13 <leio> in both tries the power led turns off after systemctl poweroff, but machine can't seemingly be started again without hard power cycle. Though on second try I held the power button down to force off the machine (despite no power led) and then it actually powered on again without pulling the cord for a bit

19:26 <janneg> leio: are you using the device tree from the kernel build? there should be "DP2HDMI HPD connected

19:26 <janneg> " messages, at least one

19:30 <janneg> please paste the output of `dtc -I fs /proc/device-tree -O dts -o - | | grep -A26 'dcp@289c00000 '`

20:08 <leio> janneg: yes, my "glue m1n1 stage2, dts and kernel together" script takes dts/apple/t6022-j475d.dtb from the same build dir as Image.gz is in

20:10 <leio> that's a `|` instead of `| |`, right?

20:14 <leio> janneg: https://bpa.st/AWEQ

20:18 <leio> I don't speak dts, but feels like it has two entries, latter of which disables it?

20:20 <j`ey> leio: there's 2 entries, because 2 dies on that platform

20:21 <leio> but on same 289c00000 address?

20:21 <j`ey> that bit I dont understand :-)

20:22 <leio> I mean, there's also 2x dcp@315c00000 which both are disabled

20:25 <j`ey> ok so, the 'ranges' property somehow makes the addresses work. see 7b0b0191a2c769819b4155a597ecef5c58e646c6

23:12 <Nefsen402> I tried dcp/dptx-fixes. It looks like something went wrong with the internal display because sway now doesn't see it as "eDP-1" but instead "Unknown-1" messing up my config. I tried plugging in my hdmi 2.0 monitor and no dice, it lights up and then stays on a black screen

23:12 <Nefsen402> In fact they monitor refused to connect to any signal even from my amdgpu machine after even a restart

23:12 <Nefsen402> I had to pull the plug and pit it back in to get the monitor to I get reset enough

23:12 <Nefsen402> logs: https://ozal.ski/dcp-log.txt

23:13 <Nefsen402> I tried alt mode dp but no life there but that's expected

23:15 <Nefsen402> I don't think that's much help, sorry