<barni2000[m]>
so mainly the difference will be the 1 include ig
<barni2000[m]>
`#include <msm8917.dtsi>`
<barni2000[m]>
but you should check your downstream dt for regulator values
<operachi[m]>
barni2000[m]: fact
<operachi[m]>
I can just add to 'compatible' the 'qcom,msm8917' too
<operachi[m]>
and other things like 'qcom,board-id'
<operachi[m]>
'<QCOM_ID_MSM8917 0>'
<barni2000[m]>
you can make a common from msm8937 variant
<operachi[m]>
Previously when I used to create the .dts for the msm8917, the qcom-board-id
<barni2000[m]>
remove the inclued 8917 from it and rename it to msm8937-motorola-hannah-common.dtsi
<operachi[m]>
operachi[m]: I miss matched with 'qcom,msm-id'
<operachi[m]>
barni2000[m]: Ok
<barni2000[m]>
and 2 small dt should be created
<barni2000[m]>
i said it wrong the 8937 include
<barni2000[m]>
maybe nora and jeter also could use a base
<barni2000[m]>
s/a/this/, s/base/common/
<operachi[m]>
btw the pmaports packages like, device-qcom-msm89x7 and the file in this packages should be changed or not?
<operachi[m]>
I mean only modules
<operachi[m]>
<barni2000[m]> "remove the inclued 8917 from..." <- you mean 'msm8937-motorola-hannah.dts' file?
<barni2000[m]>
yes
<operachi[m]>
Ok
<barni2000[m]>
msm8917-motorola-hannah.dts and msm8937-motorola-hannah.dts will includ msm8917.dtsi and msm8937.dtsi and msm8937-motorola-hannah-common.dtsi
<barni2000[m]>
btw when you need workaround for lk2nd? when you flash it to boot partition or for fastboot boot?
<operachi[m]>
nope
<operachi[m]>
just when it's done, then i just flash it or boot
<barni2000[m]>
as far as i know nora works with ADTB
<operachi[m]>
i'm so confused that nora, hannah and ahannah don't need the QCDT only
<operachi[m]>
but maybe it's because these models have other SoC
<operachi[m]>
idk
<barni2000[m]>
since someone find out setting models property is enough for motos to boot as an mtp device none of them needs QCDT
<barni2000[m]>
s/models/`model`/
<barni2000[m]>
nora is 8917
<operachi[m]>
barni2000[m]: well, I'm even more confused
<barni2000[m]>
i will show you the commits
<operachi[m]>
i don't have any idea who and why choosed firmware that supports only QCDT for the rhannah model
<operachi[m]>
you mean that, this workaround would be in the .dts file for the msm8917 hannah variant?
<operachi[m]>
s/that,/then/
<operachi[m]>
s/that/then/
<operachi[m]>
in 'msm8917-mtp.dts'
<barni2000[m]>
operachi[m]: no i mean maybe no workaround is needed
<operachi[m]>
aa Ok
<operachi[m]>
I understand
<barni2000[m]>
strange headphone switch works on rolex but not working on riva and other devices
<operachi[m]>
I was wrong
<operachi[m]>
very wrong
<operachi[m]>
it turns out that ADTB is supported
<operachi[m]>
'Lk2nd Building' section was deleted
<barni2000[m]>
cool please comment it to PR for tramurav to see he can merge it
<operachi[m]>
which PR?
<barni2000[m]>
lk2nd
<barni2000[m]>
wait i can comment it
<right_front[m]>
barni2000[m]: in msm8996, why lk2nd not responding when flashing rootfs with pmbootstrap flasher_rootfs?
<barni2000[m]>
which device?
<right_front[m]>
gemini
<right_front[m]>
barni2000[m]: gemini
<barni2000[m]>
idk i have this issue only with oneplus 3
<barni2000[m]>
* oneplus 3/3t
<barni2000[m]>
use the lk fastboot interface instead
<operachi[m]>
<barni2000[m]> "remove the inclued 8917 from..." <- surely 'msm8937-motorola-hannah.dtsi' should be name that and not something like 'msm8937-motorola.dtsi'?
<barni2000[m]>
i think it should be named as motorola-hannah-common because motorola-montana is there
<operachi[m]>
Ok
<operachi[m]>
<barni2000[m]> "i think it should be named as..." <- do you have 6.13 kernel config for msm89x7?
<barni2000[m]>
i am using 6.12.5 config with a little change
<barni2000[m]>
lets tag 6.13 branch and upgrade packages
<barni2000[m]>
i have finished with ucm configs
<barni2000[m]>
msm8917 hannah will be in the next update maybe 6.13.1
<operachi[m]>
idk why but I have problem with the building kernel