02:13 <tuxd3v> hello guys when will we see real powerfull arm device or RISCV from allwinner?

04:32 <valdikss> tuxd3v: ask AW

08:47 <ad__> gm ! question: working on h2+ stuff (bananapi m2 zero) often console on uart0 hangs, generally when i insert or remove sdcard. Generally need to reopen terminal or sometime remove and reattach usb-uart adapter

08:47 <ad__> i tought cmos levels may be the issue, but adapter works at 3,3 and seems H2+ uart also

10:39 <gamiee> ad__: this sounds like UART adaptor issue

11:35 <ad__> mmm maybe some time. But seems one time i found cpu was stuck until hw reset

11:35 <ad__> investigating

11:41 <apritzel> tuxd3v: it seems like Allwinner lost interest in high-performance SoCs a while ago, and try their luck with cheap, low-power and specialised SoCs instead

11:43 <apritzel> ad__: could this be a power related issue? First in general: flaky power supply via micro-USB, for instance

11:44 <ad__> apritzel, should not, i am powering trough usb 3. But will check this better.

11:44 <apritzel> ad__: and more serial related: did you connect some 3.3V line to the USB adaptor (do not!) Are all cables good?

11:44 <ad__> sd card is not mounted, but each time i remove and replug the card seems uart0 get stuck

11:45 <apritzel> I have seen weird issues when GND wasn't properly connected (poor connection): sometimes you see characters, sometimes not

11:45 <ad__> adaptor is only powered from usb c

11:46 <ad__> ok will check better later, when back onm this. thanks !