01:05 <MoeIcenowy> apritzel: if you resend it, could you port it to yaml binding?

05:34 <smaeul> mkazantsev: I don't think so. LVDS is the only display type I don't have hardware for, and I don't know of anyone else working on D1 displays

05:36 <smaeul> single-link LVDS should be relatively straightforward -- it should just require some changes to the TCON driver -- but there are some register changes, so it would be more than just setting the .supports_lvds quirk

05:38 <smaeul> dual-link LVDS would be much more work, since you would need to add code to switch the DPHY/"combo PHY" to LVDS mode and configure it

06:49 <montjoie> jernej: yes

06:50 <montjoie> I retested it some days ago, I need time to verify I cover all comments

06:50 <montjoie> (I just saw that everything I sais on this channel for a long time was ignored due to not being identified)

11:28 <mkazantsev> smaeul: thank you for the advice! Mine is single-link, I'll see if I can make it work

14:45 <junari> Why can an gpio-leds get into devices_deferred? In DTS it's defined like gpios = <&pio 4 19 GPIO_ACTIVE_LOW>; /* PE19 */

14:45 <junari> and vcc-pe-supply = <&reg_aldo5>;

15:51 <sepf> DarkNeutrino: have you had already a look into opp tables and temp control on h616? I started with thermal sensor and sid driver.

15:53 <DarkNeutrino> I didnt yet. Got stuck in bed. Cought the cold.

15:56 <DarkNeutrino> But i have ssh to deaktop that has the board connected so i can flash stuff and etc. So if you need it tested here as well i can take a look.

16:34 <apritzel> It would be much appreciated if someone could look at the H616 OPP tables. I think the values are floating around somewhere (Armbian? BSP?), just someone needs to consolidate and post them

16:42 <jernej> enabling and testing H6 GPU OPP would also be nice :)

16:42 <jernej> apritzel: I'll test your patch soon

16:44 <jernej> btw, gerrit feels clunkier than ML reviews

16:49 <jernej> apritzel: patch works nicely

16:50 <apritzel> jernej: don't get me started about gerrit ;-) I didn't really want to expose you to that, but I figure you can extract the patch from there anyway ...

16:58 <DarkNeutrino> Grrrr gerrit

16:58 <DarkNeutrino> jernej: any board on cheap that has H6 ?

16:59 <jernej> it seems that OrangePi 3 LTS is popular nowadays

17:00 <DarkNeutrino> Gotcha.

17:00 <jernej> but it doesn't have upstream DT yet. I have one, but I'm working on quirks, mainly ethernet and pmic.

17:00 <jernej> and Tanix TX6 box or clones are evergreen

17:01 <DarkNeutrino> Tx6 is 616 no ?

17:02 <jernej> TX6s is H616, TX6 and TX6 mini are H6

17:02 <jernej> simple :)

17:03 <DarkNeutrino> Tiny bit confusing ahah

17:05 <apritzel> they are a few TV boxes that have the same name and use different SoCs :-(

17:06 <apritzel> DarkNeutrino: take Aliexpress descriptions with a grain of salt, they are often wrong. If they mention the Mali GPU explicitly, that's the most telling fact

17:07 <apritzel> as in: if it says Mali G31, it's a H616, If it says Mali 450, then you don't know anything ;-)

17:07 <sepf> DarkNeutrino: Get well soon! I will tell you when i have something that is worth a reviewing and testing.

17:07 <DarkNeutrino> Even better. Orange pi 3 lts seems like the safest bet

17:08 <sepf> i took https://github.com/orangepi-xunlong/linux-orangepi/tree/orange-pi-5.16-sunxi64 as reference.

17:09 <DarkNeutrino> Will get it later and put it on a shelf. Marijn will soon come to my house and demand patches (jk) if i dont help with sm6125 things

17:12 <DarkNeutrino> *thats a joke obviously