14:45 <mal> bryanodonoghue: I seem to be getting "CSIPHY 3PH HW Version = 0x00000000" while the versions for CSID and VFE look correct, I did recheck the registers and based on downstream dts it uses CSIPHY 1.2.1, I wonder if the version looks correct on other platforms using the same CSIPHY?

14:48 <aka_[m]> maybe some clock is not on?

14:49 <aka_[m]> mal: which register you check?

14:51 <aka_[m]> on 8976 REVISION_ID3 holds 0x10

14:51 <aka_[m]> rest of ID0/ID1/ID2 are 0x0

14:53 <mal> that is the one reported in here https://git.linuxtv.org/media_tree.git/tree/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c?h=master#n266

14:55 <mal> I have been trying to figure out the clocks and not sure if those are correct or not

14:55 <mal> at least to CSID it seems to work since I get test pattern from it

14:57 <mal> the clocks related to csiphy seem to be on i.e. cphy_rx_clk_src, csiphyX, csiXphytimer_clk

19:54 <aka_[m]> for some weird reason i get reboots on next

19:54 <aka_[m]> when mdss gets initialized

19:54 <aka_[m]> lumag: have you tested older platforms?

20:22 <mal> aka_[m]: would you be interested in having a look at my camera changes if you could spot if something is missing or wrong?

20:22 <aka_[m]> never messed around cameras

20:22 <mal> ok

22:20 <lumag> aka_[m], yes, I usually test it on 8916 & 8996.