06:31 <tjstyle> konradybcio: I try to enable GPU support in RB1 which is using A702, porting gpucc based on RB2 and downstream implementation but it failed to load with "timeout waiting to drain ringbuffer", any suggestion?

06:47 <tjstyle> aka_[m]: have same kernel log abut ringbuffer thing when try to enable A702 on RB1, so, where is "alwayson" thing that you tell above?

07:11 <Daanct12> aka_[m]: about your interconnect driver, i disabled sync_state and that no longer blue

12:06 <aka_[m]> seems like resets i had were triggered by tsens which malfunction already for a wile

12:10 <aka_[m]> Daanct12: had half of screen blue?

12:10 <aka_[m]> on 8976 i had to define two mdp interconnects

12:11 <aka_[m]> maybe i will take spin on 8917 samsung which uses same icc driver

12:20 <Daanct12> aka_[m]: it was complete full screen

12:22 <aka_[m]> Have you wired everything?

12:22 <aka_[m]> I probably yet tried sync_state

12:30 <Daanct12> aka_[m]: i have yet to setup dsi

12:30 <Daanct12> or mdp even

16:03 <strongtz[m]> Hi, I wonder if anyone knows about the audio status on sm8550. I'm getting a lot of errors in kernel log. And after configuring the sound card via amixer cset, I can only get pop sound via headphone jack with errors.

16:04 <strongtz[m]> The kernel log is here, https://pastebin.pl/view/57575f2a

16:05 <strongtz[m]> I see that there are lots of DSP returned error xxx and Memory_map_regions failed

16:07 <strongtz[m]> By the way I'm using the sc8280xp ASoC machine driver, cause I don't find any for sm8550 even if there is DT binding

16:18 <konradybcio> krzk is your friend ^

16:19 <strongtz[m]> krzk: :P

16:44 <Degdag_Med[m]> strongtz: can you please check if ayn odin 2 has secure boot disabled or not ?

16:44 <Degdag_Med[m]> As far as i remember ayn odin sdm845 based was secboot off

17:24 <krzk> strongtz[m]: not all pathces were upstreamed. You might be missing npl clock, mentioned audio card (which is almost the same as sc8280xp)

17:24 <krzk> strongtz[m]: you can cherry-pick them from my WIP branch: n/audio-sm8450-sm8550-on-next

17:24 <krzk> https://github.com/krzk/linux.git

17:28 <krzk> the errors could suggest something is not correct with topology file ("failed to prepare Graph"). Are you using the one for QRD8550?