10:28 <bryanodonoghue> vknecht in theory yes

10:29 <bryanodonoghue> let me give you a set of commands for the TPG to test it

10:29 <bryanodonoghue> recent changes mean, even if you don't declare a sensor in your dts - you should still be able to launch the camss driver and run the test-pattern-generator

10:30 <bryanodonoghue> TPG within the CSI decoder - CSID block

10:30 <bryanodonoghue> meeting I'll get back to you

10:42 <HappY[m]> Hello dears devs.. ! I really need help.. I added ath11k_pci wifi & bt (wcn6855) .. but Bluetooth never worked with wcn6855, always show (uart completed) but bt never up.. With "qca6390" bt was worked but I don't have firmwares.... & wifi I seriously unable to find out problem..I would appreciate , if anyone help me with that..... (full message at <https://matrix.org/_matrix/media/v3/download/matrix.org/FtfmhMOReIwFUqHwEKxPXtiZ>)

11:18 <bryanodonoghue> vknecht[m]

11:18 <bryanodonoghue> media-ctl --reset

11:18 <bryanodonoghue> ~/Development/yavta/yavta --list /dev/v4l-subdev2

11:18 <bryanodonoghue> ~/Development/yavta/yavta --no-query -w '0x009f0903 1' /dev/v4l-subdev2

11:18 <bryanodonoghue> media-ctl -d /dev/media0 -V '"msm_csid0":0[fmt:UYVY8_1X16/1920x1080 field:none]'

11:18 <bryanodonoghue> media-ctl -l '"msm_csid0":1->"msm_ispif0":0[1]'

11:18 <bryanodonoghue> media-ctl -l '"msm_ispif0":1->"msm_vfe0_rdi0":0[1]'

11:18 <bryanodonoghue> media-ctl -d /dev/media0 -V '"msm_ispif0":0[fmt:UYVY8_1X16/1920x1080 field:none]'

11:18 <bryanodonoghue> media-ctl -d /dev/media0 -V '"msm_vfe0_rdi0":0[fmt:UYVY8_1X16/1920x1080]'

11:18 <bryanodonoghue> media-ctl -d /dev/media0 -p

11:18 <bryanodonoghue> ~/Development/yavta/yavta -B capture-mplane --capture=5 -n 5 -I -f UYVY -s 1920x1080 --file=TPG-UYVU8-1920x1080-000-#.bin /dev/video0

11:19 <bryanodonoghue> just enable &camss{} in your dts

11:19 <bryanodonoghue> should populate v4l subdevices in /dev

11:19 <bryanodonoghue> including the CSID

11:19 <bryanodonoghue> if you can run the TPG you know the hardware basically works

11:20 <bryanodonoghue> may need to look into the CSIPHY but, probably not

11:20 <bryanodonoghue> then you just need to hook up sensor<=>endpoints

11:32 <HappY[m]> * Hello dear devs.. ! I really need yours help.. I added ath11k_pci wifi & bt (wcn6855) .. but Bluetooth never worked with wcn6855, always show (uart completed) but bt never up.. With "qca6390" bt was worked but I don't have firmwares.... & wifi I seriously unable to find out problem..I would appreciate , if anyone help me with that..... (full message at <https://matrix.org/_matrix/media/v3/download/matrix.org/fGKANfADKteiEEWjvFjTgcDJ>)

15:39 <vknecht[m]> bryanodonoghue: thanks ! shall try that this week

16:24 <ajhalaney[m]> Do any of the upstream supported qualcom socs support s2mem? iiuc right now things are capable down to s2idle levels.... is that a correct understanding or am I way off the mark?

16:34 <bamse> ajhalaney[m]: older socs used to do s2ram...but in practice it was still pretty much the same hardware state as s2idle

16:35 <bamse> ajhalaney[m]: so the answer to your actual question, the answer is no

16:35 <bamse> ajhalaney[m]: none of the platforms that fully implements "s2ram" are upstream

17:05 <ajhalaney[m]> Cool, thanks for the details bamse, some of Qualcomm talking about suspend for sa8775p so wanted to get those details straightened out