08:24 <Xyaon> With a bit of trial and error I managed to get trough half of the systemd init process on the ideapad 4g, but then the screen turns black. I have already had to disabled the gpu in the dts to get here, and the last logs displayed on the screen don't really give me any idea of what went wrong. The laptop stays on just with a blank screen. Is there any way of getting the actual error logs? Would it log for longer to a usb serial adapter?

08:43 <Xyaon> It does continue to log to a usb serial adapter :D

14:18 <Xyaon> I got the ideapad 4g to fully boot with working keyboard and mouse, and I'm now trying to add uart and i2c busses that are working in windows to the device tree. How do I know what GPIO pins are needed for a specific i2c bus? I can't find anything in the acpi tables that would help.

14:38 <robclark> adding this to kernel cmdline might help keep the screen on, if using efifb: clk_ignore_unused pd_ignore_unused

14:42 <Xyaon> The issue was the gpu, something isn't right with the firmware or the dts. With it turned off, it works fine with fb

16:03 <erebionCCCamp232142[m]> How is support for the X13s planned to land in the distributions, for example Ubuntu or Debian?

16:03 <erebionCCCamp232142[m]> With the Ubuntu Concept Team iso there is a PPA, so that gets used for development and then required changes get upstreamed to the kernel and the other packages, I assume?

16:03 <erebionCCCamp232142[m]> Assuming everything works at some point, what's next? Waiting for a few months for everything to land in the next stable release of Ubuntu/Debian/whatever?

16:05 <erebionCCCamp232142[m]> Also, any up to date info on what is expected to work with that iso and what isn't and how useful info for the devs working on the device can be delivered?

16:18 <erebionCCCamp232142[m]> @juergh Just noticed your message from last week. It does indeed all seem to work correctly when using a newer version of ubuntu-concept-x13s, just tried it after coming back from Chaos Camp. Wifi seems stable now, graphics works, battery indicator shows percentage, the only issue I still notice is the audio devices not showing up, but otherwise it does everything I'd need my main machine to do. Maybe 2024 will be the

16:18 <erebionCCCamp232142[m]> year of Linux on ARM laptops? :)

16:21 <erebionCCCamp232142[m]> Haven't looked at 5G yet, but I assume that's a whole other level of work and will not happen anytime soon..?

16:29 <clover[m]> 5G working just fine here on arch

16:29 <clover[m]> you just need to do the FCC unlock with modem manager

16:29 <erebionCCCamp232142[m]> The symlink?

16:29 <erebionCCCamp232142[m]> Or what do you mean

16:29 <clover[m]> but wwan should be enabled in the recent x13s kernels

16:29 <erebionCCCamp232142[m]> ?

16:30 <erebionCCCamp232142[m]> What I need to look for in lsusb or lspci?

16:31 <clover[m]> 0004:01:00.0 Wireless controller [0d40]: Foxconn International, Inc. Device e0c3

16:31 <clover[m]> i think its that one

16:33 <erebionCCCamp232142[m]> Oh, it seems to be disabled in the BIOS/EFI/whatever it is called

16:36 <erebionCCCamp232142[m]> Now it gets detected, the Gnome stuff does not show me any option to add it... I'm only using Gnome so far as I haven't uninstalled it for i3 yet, lol

16:39 <erebionCCCamp232142[m]> Modem Manager does not find the 5G modem

16:47 <clover[m]> i put a section in my wiki about modem: https://github.com/ironrobin/archiso-x13s/wiki/Feature-Support#wwan--5g

16:48 <erebionCCCamp232142[m]> "Ensure WWAN is enabled in the kernel config" - any specific kernel parameter I should look for?

16:50 <clover[m]> this section: https://github.com/ironrobin/x13s-alarm/blob/trunk/linux-x13s/config#L3783

16:56 <erebionCCCamp232142[m]> Seems to be set on the Ubuntu Concept PPA.

16:57 <erebionCCCamp232142[m]> Do I need to insert a SIM card to be able to configure the modem? So far I have not inserted it as I wanted to do that after configuring it. .D

16:58 <clover[m]> idk, i use a sim card with my machine. i dont think you are going to have much luck if you don't have a sim card lol

17:01 <erebionCCCamp232142[m]> Just wanted it to recognise the device and allow me to configure it before finding a sim somewhere

17:01 <robclark> might support eSIM? Not sure what the sw support for that is like in linux. But AFAIU CrOS modemmanager as well so I guess it should be supported

17:04 <erebionCCCamp232142[m]> I think it can support eSIM, but last week I researched eSIM and Linux and could not find anything, so I doubt it would work yet.

17:04 <erebionCCCamp232142[m]> nmcli does not detect the modem, huh

17:07 <erebionCCCamp232142[m]> OK, reboot was necessary apparently. Tried restarting network-manager and modem-manager, but apparently something else had to be restarted as well

17:17 <erebionCCCamp232142[m]> Modem Manager (mmcli -m 0) shows that it tried to use an eSIM without a profile

17:18 <erebionCCCamp232142[m]> So there has to be a way to switch to the physical SIM

17:19 <erebionCCCamp232142[m]> mm-cli -m 0 --set-primary-sim-slot 1

17:19 <erebionCCCamp232142[m]> That was way too easy

17:28 <erebionCCCamp232142[m]> Trying to connect gives this result:... (full message at <https://matrix.org/_matrix/media/v3/download/matrix.org/gYAntVdmcJiCDNbKWypsXGUB>)

18:10 <clover[m]> that loooks like the output i'd get that before correctly doing the FCC unlock

18:10 <clover[m]> s/that//

18:20 <_[m]1> kernel 6.5.0 in ubuntu mantis and could boot it yay

18:20 <erebionCCCamp232142[m]> I did the FCC unlock stuf

18:20 <erebionCCCamp232142[m]> f

18:21 <_[m]1> also the basic setup of ironrobin works with btrfs, maybe I'll try fde again without /boot

18:22 <_[m]1> there was one grub option that I hadn't configured before though mm

18:25 <clover[m]> im kinda regretting btrfs, it seems like i have to run fsck more often now.

18:33 <gwolf> clover[m]: FWIW I have my C630 with btrfs, and have not had any issues with it in ~2yr.

18:34 <clover[m]> maybe its something else then

19:51 <_[m]1> clover when you hard reset or all the time?

20:06 <clover[m]> Just randomly. I can't really find a behavior that triggers it.

20:13 <clover[m]> it's not as annoying as my issue with ath11k_pci failing on boot like half of the time

21:06 <hexdump0815> xyaon: maybe this gives at least a bit of direction about what is needed to get the gpu working https://github.com/hexdump0815/imagebuilder/blob/main/systems/snapdragon_7c_woa/doc/required-firmware.md

21:07 <hexdump0815> for your system fw will of course differ and there are a bunch of special qcom processes required to run to get some of the firmware files loaded

21:09 <hexdump0815> this might give an idea about those processes (might differ a bit on your system as well): https://github.com/hexdump0815/imagebuilder/blob/main/systems/snapdragon_7c_woa/postinstall-chroot.sh

21:10 <hexdump0815> in my experience it is not possible to get all ressource info required out of the acpi tables - for instance on the samsung galaxy book go we so far did not find a way to enable the touchpad properly

21:10 <hexdump0815> also the keyboard setup is more a hack then working properly there

21:11 <steev> i have never seen the ath11k_pci issue here

21:11 <steev> clover[m]: can you hack it where if the device doesn't exist, modprobe ath11k_pci -r; modprobe ath11k_pci ?

21:11 <steev> or does it require rebooting

21:12 <hexdump0815> i think it would be a very good idea to keep your wip dts somewhere on a git repo - this makes it much easier to discuss about it

21:13 <hexdump0815> xyaon: the windows on arm systems supported in postmarketos and their kernel trees are usually also good for inspiration and the aspire1 tree from travmurav[m]:

21:49 <clover[m]> steev: if i try that, heres what i get:... (full message at <https://matrix.org/_matrix/media/v3/download/matrix.org/LscShkrgYrNXCwYOSePsjYgI>)

21:50 <steev> mani_s: ^^

21:50 <steev> maybe mani knows what might be happening

21:50 <clover[m]> fingers crossed

21:54 <steev> i've never seen that here at all

21:54 <steev> when that happens

21:54 <steev> is anything in /sys/kernel/debug/devices_deferred ?

21:57 <clover[m]> do i need any kernel parameter or config for that? tailing that file nothing appears when i do the modprobes

21:58 <clover[m]> im not surprised you dont see it. this never happens on my modem-less x13s

21:58 <steev> no, not tailing it

21:58 <steev> it would be empty or have entries in it

21:59 <clover[m]> its empty

21:59 <steev> that just means that there are no devices that are probe deferred

22:00 <steev> or maybe bamse might know? maybe there's some sorta conflict in the address space with the wwan and modem?

22:57 <bamse> clover[m]: i have seen that, but it was a long time ago, and it just works on my x13s...

23:00 <crcvxc> hjg

23:06 <clover[m]> bamse: what model do you have? mine seems to be 21BYS03Y00

23:52 <crcvxc> ghgh